DURA-BENCH ULTRA PLASTIC NURSERY BENCHTO
Dura-Bench Ultra Plastic Nursery benchtop is designed to replace traditional wood, metal, and wire greenhouse benchtop. Dura-Bench Ultra offers a tougher, longer-lasting growing surface while eliminating problems associated with other benchtop materials and features two pre-molded plastic rails the length of the part, making it easy to screw to supports and framing. The Dura-Bench Ultra design connects on all four sides of the panel allowing any combination of bench sizes to be designed and fabricated. Dura-Bench Ultra’s durable non-porous polypropylene plastic panel is designed with 1.1″ x 2.1″ rectangular holes for easy cleaning and is engineered to interconnect with other Dura-Bench Ultra panels with nylon clips to create a smooth, flat bench surface. The panels will not rot, crack, or splinter like wood products; and they will not corrode, rust or have sharp edges like expanded metal or wire tops. Attaching the Dura-Bench Ultra to metal, wood, or a pipe substructure is fast, and easy using stainless steel screws.
Call for shipping cost to your location
Description
- 24" x 48" (60.96 cm x 121.92 cm)
- Connection on all four sides
- The flexible design allows for the creation of 1' to 8' wide benches
- The 2' side includes a four-tab system that inserts into the opposite end connecting the parts
- Surface Opening: 1.1" x 2.1" rectangular holes
- Weight: 4.5 lbs. (2.04kg)
Dimensions:
Each 2' x 4' panel weighs a mere 4.5 pounds and is designed with 1.1" x 2.1" rectangular holes
4.5 lbs.
Installation
Dura-Bench panels are quickly and easily installed on metal, wood, or pipe-style benches. Panels interlock (side-by-side) without any special tools allowing for less time and labor than expanded metal or wood benchtops.
*Note: This is a benchtop only - bench frame and legs not included
Assembly Instructions (PDF)
FAQs
Q.What size pots can I put on the benchtops?
A. This depends on the style used and the distance between the supports. When properly supported, some of our panels can easily keep the average person's weight.
Q.Can, the bench panels are cut?
A. The Dura-Bench Plastics Greenhouse Bench Tops can be cut with any tools that can cut wood.
Q.What screws do I need to use?
A. We recommend a #10 x 2” long screw. Stainless screws are recommended due to the harsh environments in many applications.
Q.What chemicals can I use the clean the panels?
A. The Dura-Bench panels can be cleaned with any chemical typically used for this application.
Q.Are the bench clips required?
A. We recommend using the Dura-Bench Ultra clips with the Dura-Bench Ultra in every place where the two clip receivers meet.
