|
Tetons
Teton
Click here to request a custom greenhouse proposal
FEATURES
·
One-piece, factory welded, trusses
·
High-strength Tenzaloy column caps and gutter saddles
·
Aluminum flashing and extrusions
·
Standard sizes
§
Widths: 18', 22', 29', 36'9", 41'6"
§
Sidewall Height: 8'
§
Bay Spacing: 10', 12'
§
Load Ratings: 10psf, 15psf, 20psf, 30psf
·
Non-standard widths, sidewall heights and load requirements can be
designed
·
Competitively priced
·
2" sq. steel purlins and 3" sq. steel interval and external columns are
predrilled
Money
Saving Design
The low profile quonset
design of the Nexus Teton offers a cost effective, energy efficient
growing environment. The clear span trusses, maximum growing space, uses
minimum roof covering and can be gutter connected for ease of expansion.
The Teton is most often
covered with double poly but is adaptable to a variety of coverings.
Designed for easy conversion, different rigid coverings can be added later
with minimal changes to the structural members.
More Savings
Nexus Teton trusses are
factory welded using galvanized steel to offer consistency in dimension
and ease of site construction. With one-piece trusses, we ship fewer parts
and your greenhouse goes together much faster. Therefore, you get big
savings during construction. Wide-span trusses give you additional crop
space and minimize transportation costs.
With our gutter design,
you can easily direct roof water to a retention pond or cistern. Baked-on
white enamel adds corrosion resistance to the topside of the
pre-galvanized "walk-in" gutter system.
Choices
Options available
include partition walls to create separate climate zones and single or
double vent systems with aluminum extrusions which can be installed on
gable ends, sidewalls, or within the roof.
The Teton can be
designed for either sub-arctic or tropical environments. The house allows
for expansion in either direction. it is designed with a straight bottom
chord but is available with a high clearance truss option. This permits
the addition of overhead and oversized doors without having to change to a
higher sidewall height. As with all Nexus greenhouse systems, the Teton
carries a one year warranty. All products manufactured by Nexus will be
new and free from receipt by the customer.
|
Brochure
Front
|
Brochure
Back
 |
Grand Teton
Square Foot Estimate - $12 - $15 per square
foot (double poly on roof and 8mm PC on gables)
Features
-
Standard
Sizes
-
Widths -
21', 30', 36'
-
Sidewall
Height - 8'
-
Bay
Spacing - 10', 12'
-
Load
Ratings - 10, 15, 20 & 30 psf
-
Non-standard widths, sidwall heights and load requirements can be
designed
-
Competitively priced
-
One-piece,
factory welded, high clearance trusses
-
2" square
steel purlins and 3" steel internal and external columns are
predrilled
-
2" square
horizontal wall members and gable posts
-
Aluminum
gutter rail and gable flashing
-
2" square
steel wind and knee bracing
Roomy and Energy Efficient
The modified Gothic arch roof design of the
Nexus Grand Teton combine the energy of the Teton design with
outstanding condensate control from the steeper slope.
Its adaptable to any type of covering
without changing the structural members of the house. The Grand Teton's
design also features high overhead clearance - ideal for ease of
movement and hanging equipment, accessories an crops. A straight bottom
chord can be incorporated to accommodate specific crop needs.
 Money
Saving Design
Nexus Grand Teton trusses are factor welded
using galvanized steel to offer consistency in dimension and ease of
site construction. With one-piece trusses, we ship fewer parts and your
greenhouse goes together much faster. Therefore, you get big savings
during construction. Wide-span trusses give you additional crop space
and minimize shadowing. They can also be manufactured and shipped in
two-piece sections to minimize transportation costs.
Nexus Strong
The Grand Teton can be designed to meet
your local building code requirements. Our engineers can design your
greenhouse withstand high wind and heavy y snow loads. The truss
structure gives you a place to hang overhead equipment and baskets.
Nexus column caps and gutter saddles, made
of high-strength Tenzaloy, are designed for easy expansion of the house
in either direction. Baked-on white enamel adds corrosion resistance to
the topside of the pre-galvanized "walk-in" gutter system.
Choices
Options available include partition walls
to create separate climate zones and single or double vent systems with
aluminum extrusion which can be installed on gable ends, sidewalls, or
within the roof. As with all Nexus greenhouse systems, the Grand Teton
carries a one year warranty. AL products manufactured by Nexus will be
new and free from defective material and workmanship for one year from
receipt by the customer.
|
Brochure
Front
 |
Brochure
Back
 |
|
Hobby
